The free laser cut toy garage files on this page give you every part of a two-level wooden garage for 1:64 toy cars, including its lifting barrier, fuel pump, service bays, ramp and parking deck. One ZIP brings the drawings together in DXF, SVG, CDR, PDF and DWG formats, so you can open this free laser cut project in the program you already use with your laser cutter.
The drawings contain 27 pieces for nominal 3 mm sheet material, and the assembled garage stands on a footprint of about 33.4 × 33.9 cm. Besides the cutting lines, the files carry the engraved details that turn the flat parts into a small road system: lane lines, direction arrows, the four numbered parking spaces, the SERVICE and CAR WASH lettering, the fuel and parking symbols and the checkered pattern on the upper deck. Like many laser cut toys, the garage goes together as a 3D puzzle. The tabs on each wall enter matching slots, and the structure rises from the base to the parking deck without hardware.
Preparing the Toy Garage Files for Your Laser Cutter
Start with the format that your laser software or drawing program opens most reliably. The DXF and DWG files use millimeters, and the SVG and PDF drawings keep the parts at full size, 1:1. After you import a file, measure one of the slots: it should read 3 mm. This quick check confirms that the scale has stayed correct during the import. Then arrange the parts to suit your own sheet and machine bed, and keep all 27 pieces in your layout.
We kept the cutting lines and the engraving separate in every format. In the DXF and DWG files, the two operations sit on separate layers. In the SVG file, they are in separate groups. In the PDF file, the cutting lines are black and the engraving lines are red. Because of this separation, you can assign the engraving to its own operation and give it lighter settings than the cut, so the markings stay on the surface of the wood.
The slots are drawn at exactly 3 mm, with no allowance for a particular machine or sheet. Measure your plywood, MDF or balsa sheet before you cut, and adjust the fit with your own machine settings.
One small part needs extra attention: the pin that holds the barrier arm measures only about 3.5 × 9.5 mm. After cutting, collect it from the machine bed before you remove the sheet, because a part of that size can easily slip through the bed or get lost among the offcuts.
Download Free Laser Cut Toy Garage Files in One ZIP
- DXF cutting drawing with separate cutting and engraving layers
- SVG vector cutting drawing at 1:1 scale
- CDR CorelDRAW drawing
- PDF vector cutting drawing at 1:1 scale
- DWG CAD drawing
Download the ZIP to get all the drawings for this free laser cut toy garage, choose your format and prepare the parts for your first 1:64 car.
License and Usage
These files are licensed under CC BY-NC-SA 4.0 for strictly personal, non-commercial use.
You are free to download, cut, and modify these designs for your personal projects. However, you may not sell the digital files or any physical products manufactured from them. If you share a modified version of this design, you must credit FreePatternsArea and distribute it under this exact same license.
Unauthorized redistribution, reproduction, or commercial exploitation of these files is a violation of intellectual property rights and may result in legal action.