Download free laser cutting files for this chicken-and-chick egg holder stand. I originally designed this piece back in 2017, but I recently spent time in the workshop completely redrawing the vectors to meet today’s cleaner cutting standards. The files are provided in DXF, SVG, CDR, DWG, and PDF formats, making them ready for CO₂ lasers, diode lasers, and CNC routers.
The Design in Detail
The stand holds 8 eggs securely in a 2×4 layout on a flat tray with recessed circular slots. Instead of sitting at the back edge, the decorative main panel slots directly down the center of the tray, balancing the visual weight and separating the front and back rows of eggs.
This central panel features a mother hen with two chicks, a tulip, a sunflower, and a grass layer rising above an integrated lattice fence. The figures are cut clear through rather than heavily engraved. This ensures the silhouette carries the detail perfectly even if you leave the wood unfinished. I included some engraved feather and spiral motifs inside the hen to add surface texture, but they do not affect the main structural cuts.
Two arched legs slot into the underside of the tray to keep the whole 8-egg assembly stable on a flat kitchen counter.
Choosing Your Material Thickness
I have prepared these files for 4 mm, 6 mm, and 1/4 inch stock.
If you want a reliable build, 6 mm plywood or MDF is the best choice. The tray needs to carry the weight of eight eggs without bowing in the middle, and 6 mm gives you that necessary rigidity. The slots are sized for a nominal 6 mm fit. As always, check your actual sheet thickness before cutting. If your supplier’s wood is running at 5.7 mm or below, the tab joints will feel loose.
You can use 4 mm stock if you prefer a lighter look, but expect some flex in the tray when fully loaded. It works best for display purposes or holding lightweight items. The 1/4 inch files are included for North American setups and will cut accurately without any scaling required on your end.
For the finish, MDF provides the smoothest base if you plan to paint the stand. If you want a natural wood aesthetic, birch plywood holds the fine detail in the chick and flower cuts very cleanly and takes stain exceptionally well.
Assembly Steps
The entire stand consists of just four parts: the central decorative panel, the 8-hole egg tray, and the two arched legs. The components slot together intuitively for a quick dry-fit. For permanent daily use, a small drop of wood glue at the tab joints is all you need. There are no fasteners required.
Included File Formats
- DXF: Standard format for CNC and laser cutting software
- SVG: Compatible with Glowforge, LightBurn, Cricut, and Silhouette
- CDR: Editable vector file for CorelDRAW users
- DWG: Useful for CAM software and toolpath generation
- PDF: A printable 1:1 scale template for manual scroll saw cutting
Download the Free Egg Holder Stand Files
You can download the files below and open them in your preferred vector or CAD software. I recommend cutting from a single sheet, running a quick dry-fit to check your tolerances, and then applying your finish of choice before final assembly.
Dimensions of the Wooden Laser Cut Egg Stand:
- Height: 23.4 cm (9.4 inches)
- Width: 28 cm (11 inches)
- Depth: 13 cm (5.25 inches)
- Thickness: 4 mm, 6 mm, and 1/4 inch
