This ZIP package contains the complete 3D laser cut pendant lamp shade files. The package includes the flat cutting files for the shade body in DXF, SVG, CDR, PDF, and DWG formats.
The lamp shade is designed as a 14-part flat-sheet project for 3 mm material. When assembled, the shade measures 346.44 mm high with a 175.7 mm diameter, using twelve side panels, one radial top plate, and one lower inner support ring.
File details:
- ZIP contents: DXF, SVG, CDR, PDF, DWG
- Project type: 3D laser cut pendant lamp shade
- Parts: 14
- Material thickness: 3 mm sheet material
- Assembled size: 44 mm high, 175.7 mm diameter
- Structure: 12 side panels, 1 radial top plate, 1 lower inner support ring
- Use: decorative pendant lighting with suitable LED hardware
The slots are drawn to exact nominal geometry, so the parts carry no built-in fit tolerance. Before cutting the full set, measure your actual sheet thickness with calipers, since real 3 mm material varies by manufacturer, humidity, temperature, and quality.
The seating fit is something you set, not something the file decides for you. Measure your own laser kerf, then use your measured kerf and sheet thickness to set the appropriate kerf compensation, offset, or slot adjustment in your cutting software, for example in LightBurn, and run a small test cut on one panel slot before using a full sheet. That way the file geometry is matched to your machine and your material.
The files are prepared for the laser-cut shade body. Use suitable LED lighting hardware when you turn the cut and assembled shade into a pendant lamp.
Download the ZIP below and open the file format that matches your software. For the full design notes, light-pattern explanation, and material guidance, see the main 3D laser cut pendant lamp project page.
License and Usage
These files are licensed under CC BY-NC-SA 4.0 for strictly personal, non-commercial use.
You are free to download, cut, and modify these designs for your personal projects. However, you may not sell the digital files or any physical products manufactured from them. If you share a modified version of this design, you must credit FreePatternsArea and distribute it under this exact same license.
Unauthorized redistribution, reproduction, or commercial exploitation of these files is a violation of intellectual property rights and may result in legal action.